Kit Staircase Genius 050A
The 050A version of the Genius stair has balustrading formed with brushed stainless steel bars running down parallel with the timber handrail. This gives the entire stair a very open and modern feel.
As with all the other Genius staircases the treads are supported by an interlocking steel spine further enhancing the open and floating feel. The treads and handrail are supplied in either oak, beech or ash and are factory finished.
The staircase arrives with full instructions and you can see the fitting guide below alongside an installation video.
The stair can be purchased as a straight flight, quarter turn or half turn and will be drawn before any production starts.
Fill out the form at the bottom of the page for your price.
|Treads||40mm Ash, Beech or Oak|
|Stair Widths||670mm, 740mm, 810mm, 880mm, 950mm|
|Configurations||Straight Flight, Quarter Turn, Half Turn|
||Horizontal brushed bars – stainless steel|
|Handrail||50mm Ø Timber – in Sections|
|Adjustability||Riser height and going adjustable on site|
|Finish of Timber
||Natural varnish or Stained|
|Delivery Time||Between 2-4 weeks from order|
|Additional||Riser bars and landing balustrade can be purchased|
Timbers – Treads and Handrail
View the Installation video
Genius 050A Stair Installation Video
Genius 050A Stair Installation Video with wall support