Kit Staircase Genius 010
The 010 version of the Genius stair has horizontal wire balustrading running down the side of the stair. This can be supplied for one or both sides. Like all the other Genius models the timber treads are supported by an interlocking steel spine. There are a number of different timber to choose from for the treads and handrail. The Genius 010 has powder coated vertical newel posts supporting the wire balustrade.
The stair can be purchased as a straight flight, quarter turn or half turn and will be drawn before any production starts.
Fill out the form at the bottom of the page for your price.
Treads | 40mm Ash, Beech or Oak |
Spine Finish |
Powder Coated |
Stair Widths | 670mm, 740mm, 810mm, 880mm, 950mm |
Configurations | Straight Flight, Quarter Turn, Half Turn |
Balustrade Type |
Horizontal Stainless wires & Powder Coated Newels |
Handrail | 50mm Ø Timber – in Sections |
Adjustability | Riser height and going adjustable on site |
Finish of Timber |
Natural varnish or Stained |
Delivery Time | Between 2-4 weeks from order |
Additional | Riser bars and landing balustrade can be purchased |
Exploded Diagram
Timbers – Treads and Handrail
Natural Beech
Natural Oak
Natural Ash
Brushed Ash Available
Brushed Oak Available
Options to reduce the riser gap
Steel Finishes
View the Installation video
Genius 010 Stair Installation Video
Genius 010 Stair Installation Video with wall support