Bespoke Timber Staircase Kent

Part of a substantial domestic refurbishment, this modern and open timber staircase created a real focal point to the hallway. The previous staircase had closed risers and was fairly bulky in appearance. The new WF floating timber staircase brightened up the property, allowing light to stream through the staircase. Oak treads were supported by an oak wall stringer and brushed stainless steel spindles connected the treads and the oak handrail. Small oak riser infills were provided but not fitted when the photos were taken.

 Refurbishment Staircase

The WF staircase is our most open, floating bespoke timber staircase.  It has no stringer to the internal side so the treads appear to hover in mid air allowing the light to pass through.  This works with a specially designed handrail that has a steel core.  The spindles screw up into this handrail and the treads ‘load’ is therefore transferred to the handrail then to the newels top and bottom.  The WF is available as a straight flight, quarter turn or half turn depending on the location of walls.

If you would like a price for this project ‘Bespoke Timber Staircase Kent’, please fill out the form below.

Bespoke Timber Staircase Kent - Technical Specifications

Support Structure
WF Floating Timber Staircase
Floor to floor height 2608mm
Treads 42mm Oak
Stringers 42mm Oak
Balustrade Type 13mm Ø Steel Spindles
Handrail 150 x 42mm Oak
Newel Posts 150 x 42mm Osk
Finish of Timber
Additional Matching Landing Balustrade

Timber Options

Contact us about project Bespoke Timber Staircase - Kent