Spiral Staircase Shaftesbury – Model 71

The spiral staircase was supplied to a customer in the town of Shaftesbury. They were renovating an old property and this spiral staircase was to provide access to the loft area which overlooked the master bedroom.

The curved wall and the opening had still to be created when we visited site so they were prepared the measurements we specified. The model 71 spiral staircase was a good choice with its mix of contemporary brushed stainless and the solid traditional timber fitting in well with the property.

Small diameter Spiral Staircase

The spiral was supplied in a 1500mm diameter so to comply with he 600mm clear tread width required as a secondary domestic spiral and we added stainless steel riser bars to comply with the 100mm riser gap rule (although not fitted when pictured).

If you would like a price for the case study ‘Spiral Staircase Shaftesbury’, please fill out the form below.

Spiral Staircase Shaftesbury - Model 71- Technical Specifications

Floor to floor height 2620mm
Risers 13 @ 201.5mm
Spiral Diameter 1500mm
Clear Tread Width 600mm
Tread Type 40mm Oak
Balustrade Type 16mm Ø Stainless Steel Spindles
Handrail 50mm Ø Oak and 60 x 60mm Newels
Centre Column Brushed Stainless Barrels
Finish of Steel Brushed Stainless Steel
Additional Circular Landing Balustrade

Complete Stair Systems

Comment on Spiral Staircase Shaftesbury – Model 71 from Complete Stair Systems

Nick Rackham

Sales Manager

"A really nice couple designing and building their dream home for their young family. The spiral itself exited into a sloping attic and the entry downstairs was hampered by the walls on three sides. It was tricky but we achieved the required headroom on both entry and exit points "

Contact us about project Spiral Staircase Shaftesbury - Model 71