2010 April | Spiral Staircase and Staircase News

25/04/2010

Bespoke Spiral Staircase Pictures - Chichester

Filed under: Staircase — Tags: spiral stair, Spiral staircase, spiral staircases, spiral staircases uk, spiral stairs — Derrick @ 5:32 pm

Some stunning pictures of a bespoke spiral staircase supplied to a customer in Chichester.

This model has ‘chunky’ treads produced in walnut which box in the steel tread support. Our customer opted for simply powder coated steel spindles and handrail which was continued around the opening upstairs. Also supplied was a matching Walnut apron and Walnut floor rail for the landing balustrade.

This is a domestic spiral staircase providing access to one room. It was 1600mm diameter and spanning a floor to floor height of 2560mm.

This spiral staircase is bespoke and therefore can be produced with any type of timber treads, the centre column can be powder coated any colour and the balustrade can be stainless steel instead. Anything else - please ask!!!

You can view similar spiral staircases below, all manufacturered in the same structure -

http://www.completestairsystems.co.uk/ph_manchester.html

http://www.completestairsystems.co.uk/ph_penn.html

http://www.completestairsystems.co.uk/ph_essex.html

http://www.completestairsystems.co.uk/ph_perthshire.html

Comments (0)

09/04/2010

Spiral Staircase photos

Filed under: Staircase — Tags: modern spiral staircase, spiral stair, Spiral staircase, spiral staircases, spiral stairs, staircasetimber spiral stair — Derrick @ 5:32 pm

As we have been neglecting our news section for a little while we have built up a back log of recently completed staircase pictures to display. From now on we will try to put up at least one a week.

Starting with this model 71 spiral which was installed in Yorkshire at the end of last year. The customer was renovating an annex and required access to a mezzanine level in the roof. A spiral was the only real option as the exit point upstairs had to be directly under the apex of the roof.

The diameter of this model was 1600mm and it was spanning a floor to floor height of just over 2600mm. The model 71 spiral always has a stainless centre column and spindles and on this occasion our customer selected beechwood treads which were stained ‘walnut’ in the factory. Along with the spiral, 4.5m of matching landing balustrade was supplied for installation across the front of the mezz deck.

The model 71 is a bespoke spiral staircase. It is available in diameters up to 2.4m and can be manufactured with a variety of timber treads – Oak, Ash, Maple, Beech and Larch. The newel posts and handrail are either timber to match the treads or stainless steel (click to view picture of this option).

Comments (0)

Homebuilding Show Review

Filed under: Staircase — Tags: kit stairs, spiral staircases, spiral stairs, staircasestimber stairs — Derrick @ 5:14 pm

It has been a few weeks now since the show in Birmingham but just thought I would post some comments.
Although we had a very small stand in an ‘on paper’ bad position it was pretty succesful. We were situated near the toilets / food hall and the seminar theatres so got a fair amount of passing trade. Although we signed up too late to get into the showguide we had plenty of interest and have spent the last two weeks quoting solidly.
We do love talking about staircases and we did just that for four whole days!!!

Comments (0)